How to make pure gold easy from gold alloy
Hello, friends
Today i have How to make pure gold easy from gold alloy. Gold recovery use nitric acid.
It is a method of making pure gold as in the past and is popularly used in ancient times Up until now.
Extraction of gold by smelting is done with metallic mix gold. Scrap gold, jewelry gold, with gold components for more than 25%.
Not suitable for metal gold plated surfaces.
Ratio
Gold alloy 1
Copper 1
Lead 2
1. Melt Metal all together. The copper melt first. put the gold and lead. homogeneous melt.
2. Pour the melted gold into the water. broken down into smaller ones.
To make it easier to use nitric acid to dissolve the metal is not gold.
Nitric acid mixed with water, ratio 1 to 1
Boil nitric acid with 80 Celsius Boil until no air bubbles.
Clean the gold powder with hot water or bring to a boil.
Dry gold powder
In some cases. If gold is mixed evenly in the alloy and at a low enough concentration, you can use plain nitric acid to dissolve away impurities. However, if the gold is more pure (or is an external plating), what actually happens is that the nitric acid tries to dissolve everything, but the gold blocks it from coming through. In that case, you purify an outer layer, but the internal layers are not pure because they are protected by an insoluble layer of gold. To fix this, we can add hydrochloric acid to the nitric acid (so the gold is also dissolved) and then selectively precipitate out the gold.
Thank you very much
#GoldNitricAcid
#GoldAlloy
0 ความคิดเห็น: