Gold Recycle How to Get Started Scrap Electronic Components

 Gold Recycle How to Get Started "Scrap Electronic Components"


In this video, we'll show you how to recycle scrap components and turn them into gold! By collecting old electronics and turning them into gold.

To recover gold from a CCD camera, you will need to disassemble the camera and extract the CCD sensor. The sensor will likely be attached to a PCB, which contains a small amount of gold in the connectors and traces.


Once you have extracted the sensor, you can use a process called "leaching" to dissolve the gold. This involves mixing the sensor with a chemical solution that dissolves the gold but leaves other materials behind. The solution is then filtered to remove the dissolved gold.


It is important to note that this process requires special equipment and chemicals, and should only be done by someone with experience in handling hazardous materials. Additionally, the amount of gold recovered may be small and not worth the effort and risk involved.



Recovering gold from old electronic components involves a process called e-waste recycling. This involves disassembling electronic devices and extracting valuable materials, such as gold, copper, and other metals, for re-use.

The process of e-waste recycling typically begins with the collection and transportation of electronic waste to a recycling facility. Once at the facility, the electronic waste is sorted and separated into different materials, such as plastics, metals, and glass.

Next, the metals are extracted from the electronic waste using a variety of techniques, such as shredding, smelting, and chemical leaching. The extracted metals, including gold, are then refined and sold to manufacturers for use in new products.

It is important to note that e-waste recycling should be done by a reputable facility that follows proper safety and environmental guidelines. Additionally, while there is a small amount of gold present in electronic components, it may not be cost-effective to recover it.

Gold wire is often used in electronic components such as connectors, switches, and integrated circuits. The gold is used because it is an excellent conductor of electricity and is resistant to corrosion.

To recover the gold wire from electronic parts, you will need to disassemble the parts and extract the gold wire. This can be done manually with tools such as tweezers and soldering iron, or with specialized equipment like a wire stripping machine.



Once the gold wire is extracted, it can be refined to remove any impurities and increase the purity of the gold. This refining process can be done using a variety of methods, including chemical leaching, smelting, and electroplating.

It is important to note that extracting and refining gold wire from electronic parts can be a complex and time-consuming process. Additionally, the amount of gold recovered may be small, and not worth the effort and cost involved. It is always best to use professional service for this process.

0 ความคิดเห็น:

โพสต์แนะนำ

How to recycle gold and silver from cpu computer scrap Old CPU Scrap Gold Value

How to recycle gold and silver from cpu computer scrap  Old CPU Scrap Gold Value youtube Subscribe to this ►►► https://goo.gl/9...