Incredible Gold Recovery from IC Chips: Making process How It is Done

 ic chips gold recovery

Gold Recovery from IC Chips: How to Remove Them Easily

How to Recover Gold From IC Chips

Gold Recovery From IC Chips - How it works and why it is so Important

Learn How to Recover Gold From IC Chips

Gold Recovery from IC Chips: How It is Done

separate the IC chip from the circuit board I used a heat gun to disassemble it. Anyone have a cooler way, please suggest. Comment and tell me. for people to be interested in using

In this video, we'll be discussing how to recover gold from IC chips. This process is used to remove gold from electronic circuit boards, and it's a very effective way to get the gold out.

Separate the circuit board that is attached to the IC chip.

This video is a helpful guide for anyone who wants to recover gold from IC chips. It'll explain the process in detail and provide you with helpful tips on how to carry out the recovery process. So if you're looking for a way to remove gold from electronic circuit boards, be sure to watch this video!

We will get 2 parts of raw materials: a green circuit board that is separated from the IC chip. and the black compound part of the IC chip Inside there are many small gold wires. We will use this piece to extract gold.

The procedure is not complicated. Bring the parts to boil with 98% sulfuric acid, temperature 90 degrees Celsius.

The process of recovering gold from IC chips can be complex and requires specialized equipment and knowledge. It is also important to note that there are environmental and safety concerns associated with these methods, and they should be done in accordance with all applicable laws and regulations.

The black compound is completely dissolved by sulfuric acid, leaving a die chip with large amounts of gold wire attached and possibly fiber strands.

Separating the fibers, then collecting the gold wire into a lump. Melt these gold wires and you will get 99.99% pure gold.

There are several methods for recovering gold from IC chips, including cyanide leaching, smelting, and acid dissolution. Cyanide leaching is a process in which the IC chips are crushed and then treated with a dilute cyanide solution, which dissolves the gold. Smelting involves heating the IC chips to a high temperature in order to melt the gold, which can then be poured off and collected. Acid dissolution is a process in which the IC chips are treated with an acidic solution, which dissolves the gold. 

You may need some time to collect the gold wire and isolate the unwanted parts. But it is considered the first step towards success.

To smelt gold, I used a blowtorch gas torch butane with a small amount of powder first. for better smelting

this time extracting gold from IC chips may not be much but when compared to the weight of raw materials I think it's very good, and if we sell larger processes, more materials. There is an opportunity for us to make money and profit from this work. I hope my video will be useful for everyone. But don't forget about safety in working with chemicals should be the first thing to consider. If we die before spending money The money earned would be of no use. Thank you very much for watching the video.